Questions? Let us help:

Contact Us

AEMC K110 Test Lead

Model: K110

AEMC K110 DC/AC MicroProbe Model K110 (450mA, 10mV/mA)

$699.00 USD

1 to 2 Weeks

The DC/AC Microprobe Model K110 measures as low as 100µA AC or DC. The unit has proportional mV output for direct readings on DMMs. The high accuracy K110 is ideal for calibration of current loop process instruments (e.g., 4 to 20mA or 0 to 20mA).

  • Industrial process controls (4 to 20mA current loops)
  • Electronic circuit design, testing and repair
  • Automobile wiring and engine control systems
  • Avionics systems maintenance and repair
  • Fault and signal location in complex networks
  • Ground and leakage current measurement
  • Pre-deployment testing of power-conscious equipment
NOTE: This product is currently on long back order from the manufacturer and will not be available until Jan 09. For an alternative product, please call us toll free and talk to our product experts who can recommend an alternate current probe.

Operating Range
Current Range 0 to ±450mADC; 0 to 300mArms. (sinusoidal); 0 to 450mA peak, square and step-discontinuous waveforms
Frequency Range DC to 1.5kHz (@ -3dB sine)
Output Noise < 100mV, DC to 3kHz
Overload Indication Red LED indicates momentary or continuous overload
Probe Impedance <1mH
Reference Conditions 23°C ±3°, 20 to 75% RH, battery voltage 9V ±0.1V; earth's magnetic field < 40A/m; absence of AC fields; input impedance of display device ³1MW/100 pF; DC or sinusoidal AC current 45 to 65Hz
Working Voltage 300V per IEC 1010-1 Cat. II
Influence of Adjacent Conductor
Range Value 50Hz at 23 mm of the probe
Influence of Adjacent Conductor < 100mA/A
Rise Fall Time
Rise Time < 200µS, 10 to 90% Vout
Fall Time < 200µS, 90 to 10% Vout
Output Signal
Output Signal 10mV/mA
Rang DC / AC
Resolution 50µA typical / 100µA typical
Current Range DC / AC
Accuracy % of Reading 0.5% Reading ± 150mA / 0.8% Reading ± 200mA
Mechanical Specifications
Altitude Operating: 0 to 2000m; Non-operating: 0 to 12km
Battery Life 20 hours approximately
Cable (Sensor to Electronics) 5 ft (1.5 m)
Colors Dark gray
Dimensions Probe: 4.4 x 0.6 x 1.0" (111 x 15 x 25mm); Electronic Module: 4.9 x 2.5 x 1.1" (124 x 64 x 28mm)
Drop Test 1.0m on 38mm of oak on concrete; Test according to IEC 68-2-32
Low Battery Green LED on when battery voltage ³6.5V
Maximum Cable Diameter 3/16", 0.180" (4.5mm)
Mechanical Shock 100g (IEC 68-2-27)
Operating Temperature -14° to 131°F (-10° to 55°C)
Operating Relative Humidity < 95% @ £35°C 75% @ 55°C
Output Two 4mm safety banana jacks, standard 3/4" (19mm) spacing
Power Supply 9V Alkaline, NEDA 1604A, 6LR61 or IEC 6 LF22
Protection Index (IP) IP 40 (IEC 529)
Storage Temperature -40° to 176°F (-40° to 80°C)
Vibration Test per IEC 68-2-6
Range Value 5 to 15Hz / 15 to 25Hz / 25 to 55Hz
Vibration Amplitude: 1.5 mm per IEC 68-2-6 / Amplitude: 1 mm per IEC 68-2-6 Amplitude : 0.25 mm per IEC 68-2-6
Weight 9 oz (250g)
Zero Adjustment 10 turn potentiometer
External Influences
Influence of Temperature £500 ppm. /°K or 0.5%/10°C
Safety Reference Specifications
Safety Ratings EN 61010-2-32
Agency Approvals CE Mark

Ask a Question about the K110

comments powered by Disqus

Current Promos

Get Free Shipping on any purchase over $299