AEMC CM605 Clamp-on Meter Model CM605 (100AAC/DC, Low Current)
The AEMC CM605 Multifunction Clamp-on Meter is an ideal choice for both process and general industrial markets. It is also the perfect instrument for measuring 4 to 20mA process signals, as well as, the higher currents (up to 100A) associated with general industrial monitoring and troubleshooting.
The AEMC CM605 is a versatile device that is capable of measuring both AC/DC voltage, up to 600V, and AC/DC current. It can also measure resistance up to 10kΩ and includes a continuity buzzer to assist in circuit verification.
For operator convenience, the AEMC CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
| MODEL | CM605 |
| ELECTRICAL | |
| AC Current | |
| Measurement Ranges | 2 Ranges: 10A, 100A |
| Accuracy & Resolution | 10A: 2.0% ± 10cts - 1mA Resolution 10A: 2.0% ± 10cts - 1mA Resolution > 80A: 3.5% ± 10cts - 10mA Resolution |
| Frequency Range | 2 Ranges: 50 to 500Hz |
| DC Current | |
| Measurement Ranges | 2 Ranges: 10A, 100A |
| Accuracy & Resolution | 10A: 2.5% ± 10cts - 1mA Resolution 80A: 2.5% ± 10cts - 10mA Resolution > 80A: 4.5% ± 10cts - 10mA Resolution |
| AC Volts | |
| Measurement Ranges | 600Vrms |
| Accuracy & Resolution | 1.5% ± 5cts - 100mV Resolution |
| Frequency | 40 to 500Hz |
| Input Impedance | 10MΩ, < 50pF |
| DC Volts | |
| Measurement Ranges | 600V |
| Accuracy & Resolution | 1.0% ± 2cts - 100mV Resolution |
| Input Impedance | 10MΩ |
| Resistance (Ohms) | |
| Measurement Ranges | 10kΩ (9999Ω) |
| Accuracy & Resolution | 1.0% ± 3cts - 1Ω Resolution |
| Test Voltage | < 3.0VDC |
| Continuity | |
| Measurement Ranges | Buzzer < 100Ω ± 25Ω |
| Resolution | 1Ω |
| Test Voltage | < 3.0Vdc |
| Analog Output | |
| Output | 10mV/Aac & Adc through front banana jacks |
| Frequency | 0 to 20kHz @ ± 3db |
| Output Impedance | 3kΩ, < 50pF |
| Other Functions | |
| Adc Zero & Relative Function | One touch push button (ZERO Button) to Zero Adc, or other readings. Relative function also used in the other ranges to compare two measurements. |
| HOLD Function | Holds A & V measurements when pressed (HOLD button) |
| PEAK Function | Captures PEAK (1ms) V or A measurement when activated (PEAK Button) |
| Auto-Ranging | “AUTO” displayed on LCD |
| Over Range | “OL” displayed on LCD for all measurements |
| Auto-Off | Auto-Off after approx 10 minute with Over-Ride |
| Low Battery | Low Battery indication on LCD |
| MECHANICAL | |
| Jaw Opening (Window) | Ø 0.45" (Ø 12mm) or .40 x 1.39" (10 x 35mm) |
| Power Source | Two 1.5V AAA (LR03) batteries (included) |
| Dimensions & Weight | 7.95 x 2.76 x 1.33" (202 x 70 x 34mm) – 6.5 oz (180g) |
| Safety Standards | IEC/EN 61010-1 and 2-032 – 600V CAT II and 300V CAT III – Pollution Degree 2 Class 2 – Double or reinforced insulation, CE mark |
