Questions? Let us help:

Contact Us

AEMC 8220 Single Phase Portable Power Analyzer

Model: 8220

Designed as a power and energy datalogger to record electrical parameters, distribution network disturbances and machinery in operation. Features on-board datalogging, software and large backlit display

$979.00 USD

1 to 2 Weeks

Add In House NIST Traceable Calibration to your 8220

Clear selected options

AEMC 8220 Single Phase Power Analyzer is a measurement tool for electrical parameters and distribution network disturbances, enabling the user to obtain instant measurements of the main characteristics of a single-phase network (voltage, current, power, voltage and current harmonics, etc.) and to monitor machinery in operation (temperature, inrush current and duration of operation, distance of windings and rotational speed).

AEMC 8220 is capable of AC + DC measurements and features an electroluminescent backlit digital display and is rated to 600V Cat III.

The AEMC 8220's accuracy is better than 1% (excluding current sensors). It has a great flexibility due to AEMC's range of current sensors, measuring from a few hundred milliamps to several thousand amps. See the available kits below that include current transformers.

The 8220 Single Phase Power Analyzer is designed for technicians, control and maintenance engineers, as well as electrical contractors and educators.


  • Measurement and recording of power system quality (kW, VA, VAR)
  • Energy metering (kVAh, VARh, kWh)
  • Motor start-up analysis
  • Measure RPM
  • Determine phase rotation
  • Detect hot spots (temperature) in wiring and equipment
  • Verification of power distribution circuits
  • In plant troubleshooting of power distribution panels and individual machinery

Key Features

  • Measures up to 660Vrms or VDC
  • Measures up to 6500AAC or 1400ADC (probe dependent)
  • Displays Min, Max and Avg Volts and Amps, Crest Factor, Peak and K-Factor
  • Calculates and displays Watts, VARs and VA, Power Factor and Displacement Power Factor for single-phase and balanced three-phase
  • Displays THD for voltage and current
  • Displays individual harmonic values for Volts and Amps through the 50th harmonic
  • Captures and displays inrush current phase rotation and RPM
  • Displays temperature in °F or °C
  • Displays resistance up to 2000Ω and conducts continuity and diode tests
  • Stores up to nine complete sets of readings for all volt, amp, power, harmonics and other measurements
  • Configurable fromDataView® software or front panel
  • Includes DataView® software free for data download and storage, real-time waveform display, analysis and report generation


VOLTAGE (TRMS) Phase-to-Phase: 660V Phase-to-Neutral: 600V
CURRENT (TRMS) MN Clamp: 5mA to 100mA/120A or 2 to 240A MR Clamp: 10 to 1000Aac, 10 to 1400Adc SR Clamp: 3 to 1200A AmpFlex®: 10 to 6500A
FREQUENCY (Hz) 40 to 70Hz
OTHER MEASUREMENTS kW, kVAR, PF, DPF, VA, Phase Rotation Temperature, RPM, Resistance, Continuity, and Diode Test
HARMONICS 1st to 50th
SAMPLING FREQUENCY 256 Samples/cycle
DATA STORAGE Stores nine sets of readings for volts, amps, power, and harmonics
POWER SOURCE Six NiMH AA rechargeable battery pack or six 1.5V AA Alkaline batteries AC Supply: 120/230Vac (50/60Hz)
BATTERY LIFE  ≥ 8 hours with display on  ≥ 40 hours with display off (recording mode)
DISPLAY Three-line backlit digital with custom icons
DIMENSIONS 8.3 x 4.3 x 2.4 in (211 x 108 x 60 mm)
WEIGHT 1.9 lbs (0.88kg)
SAFETY RATING EN 61010, 600V Cat. III, IP 54, Pollution Degree 2

Ask a Question about the 8220

comments powered by Disqus

Current Promos

Get Free Shipping on any purchase over $299