AEMC 512 Clamp-on Meter (TRMS, 1000AAC, 750VAC/1000VDC, Hz, Ohms, Continuity)
The AEMC 512 Clamp-On Meter is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The AEMC 512 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.
The AEMC 512 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function.
The AEMC 512 is sized for a comfortable, one-handed operation. This model is a True RMS clamp-on that provides RMS measurements for today's non-linear electrical environments. The jaw opening for the AEMC 512 is 1.575" (40mm).
| AC Current | |
| Range | 0.05A to 1000A |
| Resolution | 40A: 0.01A; 400A: 0.1A; 1000A: 1A |
| Basic Accuracy | 50 to 500Hz: ±1.9% of Reading + 5cts |
| Frequency Range | 50 to 500Hz |
| Overload Protection | 40A: 800Arms; 400A: 1500Arms; 1000A: 1500Arms |
| AC Volts | |
| Input Range | 0.5V to 750V |
| Range | 400V / 750V |
| Resolution | 0.1V / 1V |
| Accuracy | ±1.2% of Reading + 5cts |
| Input Impedance | 10MW |
| Overload Protection | 1000Vrms |
| Frequency Current Input | |
| Range | 4kHz |
| Resolution | 1Hz |
| Minimum Input Signal | 2Arms |
| Accuracy | ±0.1% of Reading + 1ct |
| Frequency Voltage Input | |
| Range | 10kHz |
| Resolution | 10Hz |
| Minimum Input Signal | 5Vrms |
| Accuracy | ±0.1% of Reading + 1ct |
| DC Volts | |
| Range | 0.2 to 1000V |
| Resolution | 400V: 0.1V; 1000V: 1V |
| Accuracy | ±0.75% of Reading + 2cts |
| Input Impedance | 10MW |
| Overload Protection | 1200Vrms |
| Continuity | |
| Range | Beeper |
| Measurement | <40W |
| Max. Test Voltage | 3VDC |
| Overload Protection | 600Vrms |
| General Specifications | |
| Digital Display | Digital: 3¾ digits LCD display, 4000 count (max. reading 3999) |
| Analog Display | Fast 42-segment analog bargraph display |
| Symbol & Scale Range | Automatic according to range and input signal |
| Polarity | Minus sign displayed when negative signal applied to input |
| Overload | OL Displayed when input signal exceeds range |
| Sample Rate | 2 samples/sec for the digital display; 20 samples/sec for the analog bargraph |
| Jaw Opening Size | 1.575" (40mm) |
| Battery | 9V, NEDA 1604 or 6F22 or 006P |
| Low Battery Indicator | Symbol displayed when the battery is below the required voltage |
| Auto Power Off | The meter will power itself OFF if there is no push button or rotary switch operation for 30 minutes |
| Dimensions | 9.53 x 2.60 x 1.42" (242 x 66 x 36mm) |
| Weight | 14.10oz (400g) with batteries |
| Environmental Specification | |
| Operating Temperature | 32° to 104°F (0° to 40°C), <80% RH, non-condensing |
| Storage Temperature | 14° to 140°F (-10° to 60°C), <70% RH, battery removed |
| Operating Altitude | 2167 ft (2000m) |
| Safety / Reference Specifications | Safety / Reference Specifications |
| Protection Level | Double insulation; EN 61010, 600V, Cat. III and EN 61010, 1000V, Cat. II |
| Agency Approvals | CE Mark |
