Questions? Let us help:

Contact Us

AEMC 511 Clamp-on Meter

Model: 511

AEMC 511 Clamp-on Meter (AC, 1000AAC, 750VAC/1000VDC, Ohms, Continuity)

$159.00 USD

1 to 2 Weeks

Add In House NIST Traceable Calibration to your AEMC 511 Clamp-on Meter

Clear selected options

The AEMC 511 Clamp-on Meter is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 511 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.

The Model 511 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function.

The Model 511 is sized for a comfortable, one-handed operation. This model is average sensing and designed for traditional average responding electrical systems. The jaw opening for the Model 511 is 1.575" (40mm).


  • Commercial, industrial, residential and HVAC troubleshooting
  • Power panel, junction box and battery bank monitoring
  • AC or DC motor testing
  • Power plant troubleshooting
  • Electrical testing and troubleshooting on traditional loads

Key Features

  • Standard size, full function clamp-on meter
  • 1000AAC current measurements
  • 750VAC/1000VDC volt measurements
  • Resistance measurement to 4000Ω
  • Continuity with beeper below 40Ω
  • Frequency measurements from V and A
  • Diode test
  • 1ms Peak function for fast capture of signals
  • Hold function to "freeze" readings
  • Push-button for easy ADC zeroing
  • Large easy-to-read 4000-count display
  • 42-segment analog bargraph
  • Includes test leads and soft carrying pouch


AC Current
Range 0.05A to 1000A
Resolution 40A: 0.01A; 400A: 0.1A; 1000A: 1A
Basic Accuracy 50 to 500Hz: ±1.9% of Reading + 5cts
Frequency Range 50 to 500Hz
Overload Protection 40A: 800Arms; 400A: 1500Arms; 1000A: 1500Arms
AC Volts
Input Range 0.5V to 750V
Range 400V / 750V
Resolution 0.1V / 1V
Accuracy ±1.2% of Reading + 5cts
Input Impedance 10MW
Overload Protection 1000Vrms
Frequency Current Input
Range 4kHz
Resolution 1Hz
Minimum Input Signal 2Arms
Accuracy ±0.1% of Reading + 1ct
Frequency Voltage Input
Range 10kHz
Resolution 10Hz
Minimum Input Signal 5Vrms
Accuracy ±0.1% of Reading + 1ct
DC Volts
Range 0.2 to 1000V
Resolution 400V: 0.1V; 1000V: 1V
Accuracy ±0.75% of Reading + 2cts
Input Impedance 10MW
Overload Protection 1200Vrms
Range Beeper
Measurement <40W
Max. Test Voltage 3VDC
Overload Protection 600Vrms
General Specifications
Digital Display Digital: 3¾ digits LCD display, 4000 count (max. reading 3999)
Analog Display Fast 42-segment analog bargraph display
Symbol & Scale Range Automatic according to range and input signal
Polarity Minus sign displayed when negative signal applied to input
Overload OL Displayed when input signal exceeds range
Sample Rate 2 samples/sec for the digital display; 20 samples/sec for the analog bargraph
Jaw Opening Size 1.575" (40mm)
Battery 9V, NEDA 1604 or 6F22 or 006P
Low Battery Indicator Symbol displayed when the battery is below the required voltage
Auto Power Off The meter will power itself OFF if there is no push button or rotary switch operation for 30 minutes
Dimensions 9.53 x 2.60 x 1.42" (242 x 66 x 36mm)
Weight 14.10oz (400g) with batteries
Environmental Specification
Operating Temperature 32° to 104°F (0° to 40°C), <80% RH, non-condensing
Storage Temperature 14° to 140°F (-10° to 60°C), <70% RH, battery removed
Operating Altitude 2167 ft (2000m)
Safety / Reference Specifications Safety / Reference Specifications
Protection Level Double insulation; EN 61010, 600V, Cat. III and EN 61010, 1000V, Cat. II
Agency Approvals CE Mark

Ask a Question about the 511

comments powered by Disqus

Current Promos

Get Free Shipping on any purchase over $299